Flexospan - FE12 - Roofing, Wall Panels, Buildings

FE12
FLAT SIDING PANEL

Flush Siding Wall Panel
w/Concealed Fastener - 12" Wide

CAD STANDARD DETAILS

FE12 LOAD TABLE

SPECIFICATION DATA SHEET

SECTION PROPERTIES (All Panels)

FE-12 is a concealed fastener panel that gives a flat clean appearance to your building. When used in combination with our FL-24 liner panel and the proper combination of insulation and subgirt, U values as high as .065 can be obtained.

When used in combination with the FE-66 panel some very interesting effects can be created.

FE-12 - Concealed Fastener Architectural Metal Siding Panel

Stainless Steel Gauges

18, 20, 22, & 24 ga

15 Standard Colors

Non-standard colors can be ordered at minimum quantities.

4 Protective Finishes

(Mill finish is also available.)

G-90 Galvanized Coatings:

Siliconized Polyester

G4 mil. Flexshield

Kynar/Hylar based finishes

Flexospan's FE-12 and FE-66 concealed fastener architectural siding wall panels are among our most versatile.

The FE-12 is a 12"-wide, flush panel, with stiffener ribs. (It is available without the stiffener ribs.) It has a clean, flat appearance.

The FE-66 is a 12"-wide wall panel, recessed every six inches to provide a shadow effect. The two panels can be used alone, or in combination to create interesting, highly architectural effects.

Both wall panels have concealed fasteners, reducing the number of through-holes and improving water tightness. Both can be used with our FL-24 liner panel to obtain U values as high as 0.65 units. (The FE-12 is a 12"-wide, flush panel, with stiffener ribs. It has a clean, flat appearance. The two wall panels can be used alone, or in combination to create interesting, highly architectural effects.)