7/8" CORRUGATED
METAL PANEL

Flexospan offers two corrugated roofing and siding wall panel products that are are suitable for projects requiring a cost-effective, yet strong panel. Our 7/8"- roofing panel is the best choice for projects with large spans, where cost containment is important.

By increasing the corrugation depth to 7/8", much greater spans are possible. This results in a savings on structural steel cost. When used as a roofing sheet, the 7/8" deep corrugation is capable of carrying off greater volumes of water than the 1/2" corrugated, making it useful for roofing applications.

	Stainless Steel Gauges
	18, 20, 22, & 24 ga

	Aluminum  Gauges
	.032" & .040" ga

	15 Standard Colors
	Non-standard colors can be ordered at minimum quantities.
	4 Protective Finishes
	(Mill finish is also available.)

The Flexospan 7/8" corrugated roofing panel is used for medium-length spans, or when strength is important.

Flexospan manufactures roofing and wall panel products from our stocked, 44" coil width and a 36" width.  Our 44" coil yields an overall panel width of 36", a roofing coverage of 32" and a wall coverage of 34.67 inches for the 7/8" panel. Narrower widths are available. Minimum quantities apply. Check with factory for availability.