flexospan
Metal Roofing & Siding Panels, Purlins & Girts
Self-Storage & Industrial Metal Buildings


FSS-18
STANDING SEAM
ROOF PANEL


2.625" Standing Seam Metal Roofing Panel
18" Coverage
  Roofing Panel
  icon-dwg-pdf CAD STANDARD DETAILS
  icon-pdf FSS-18 LOAD TABLE
  icon-pdf SPECIFICATION DATA SHEET
  icon-pdf SECTION PROPERTIES (All Panels)


The Flexospan Standing Seam 18 metal roofing panel is designed for both new and retrofit projects. With a seam of 2 5/8" or 2.625", an overall coverage area of 18" and stiffening ribs as standard, the FSS-18 is especially useful where strength over open purlins is required or where there are long runs with limited openings. With concealed clip and fastener systems, there are fewer roofing penetrations, reducing the possibility of leaks.
 

Fss18

The FSS-18 has been UL 90 tested for uplift. It's a good choice when both strength and economy are required. Pre-formed profile closures are available for ridge and high eave conditions, to match the color and finish of the panels.

icon-metals   Stainless Steel Gauges
  22 & 24 ga

15 Standard Colors
Non-standard colors can be ordered at minimum quantities.
 
4 Protective Finishes
(Mill finish is also available.)

Stocked Materials:

  • G-90 Galvanized

  • Galvalume

  • Stainless Steel

Flexospan's FSS-18 Standing Seam Roof is designed for both the retrofit and new construction markets. Economy, strength, ease of installation, and weather tightness are the major considerations in the system design. With millions of square feet of roofing that need replaced, Flexospan offers a system which, when used in combination with various insulations and sub-framing systems, can make any re-roofing project a success. With the concealed clip and fastener system, roof penetrations are kept at a minimum, greatly reducing the possibility of leaks.

Narrow width can be ordered at minimum quantities.


flexospan seal


switch desktop