flexospan
Metal Roofing & Siding Panels, Purlins & Girts
Self-Storage & Industrial Metal Buildings


FLEXBEAM
TRAPEZOIDAL PANEL


Flexbeam Roofing & Wall Panel
36" Coverage
  Roofing PanelSiding Panel

  icon-dwg-pdf CAD STANDARD DETAILS
  icon-pdf FLEXBEAM LOAD TABLE
  icon-pdf SPECIFICATION DATA SHEET
  icon-pdf SECTION PROPERTIES (All Panels)


Flexospan's Flexbeam 7.2 roofing and 7.2 siding wall panel is economical, strong and aesthetically pleasing. It has a trapezoidal profile, important for many architectural applications. The standard Flexbeam wall panel is 38 7/8" overall, with a 36" coverage.

This configuration helps lower costs by reducing the amount of material used at side laps and the number of sheets handled in the field.

icon-metals   Stainless Steel Gauges
  18, 20, 22, & 24 ga

icon-metals Aluminum  Gauges
.032" & .040" ga

15 Standard Colors
Non-standard colors can be ordered at minimum quantities.
 
4 Protective Finishes
(Mill finish is also available.)


Stocked Materials:

  • G-90 Galvanized

  • Galvalume

  • Acrylic-Coated Galvalume

  • Stainless Steel

  • Aluminum

Factory mitered corners are available when Flexbeam is erected horizontally.

It's also available in a 31 1/2" width, with a coverage of 28.8", minimum quantities apply, check with factory for availability.



Flexbeam is a 1 " deep, 7.2" pitch, trapezoidal ribbed roofing and siding panel that is economical, high in strength, and aesthetically pleasing. The standard Flexbeam profile is produced at 38-7/8" overall width with 36" coverage, saving costs in sidelap material and quantity of sheets to handle in the field. Flexospan makes factory formed profile corners in matching finish and gauge to compliment horizontally erected panels.

Narrow width can be ordered at minimum quantities.



flexospan seal


switch desktop